6mm Stainless Steel Special Narrow Square Maillon Rapide

Special Narrow – 6mm Stainless Steel Square Maillon Rapide

This is a special narrower version of the standard 6mm square maillon suitable for narrower loops on reserves and bridles. Use as single point, master connection between your parachute bridle loop (which generally comes with your parachute) and a Y-bridle (which normally comes with your harness, or is purchased as an accessory). Suitable for attaching single point reserves to bridles, mostly used for 10 – 20 mm flat webbing. Ideally use a neoprene cover, elastic bands or heat shrink to stop movement and rotation once fitted.

This Maillon has a breaking strength of 24kN which meets the EN1651:2018 requirements for parachute bridle connections.

The best strength/weight connector on the market, manufactured in France by Peguet.

Ideal for any application calling for reliable strength, smallest size and lightest weight.

NOTE: Steel maillons are stamped with a “Working Load Limit” (WLL) corresponding to 20% of their minimum breaking strength (BL). The WLL is the maximum load the manufacturer guarantees will not deform the maillons, allowing opening of the screw closure with fingers.

WARNING: When using steel maillons, double-check and triple-check that they are screwed shut properly as part of every pre-flight check. Tightening should be done with fingers. A spanner may be used carefully, just give them a ‘nip’. Threadlock compound or liquid is not recommended.

WLL: 480kg
BL: 2400kg
Total length: 55mm
Internal width: 25mm
Weight: 44g

Stock code: MR04-N-6